Product Profile

The charging station can provide an analog input function, the input analog is AC0-1.0V, which is used to display the current working current.

When the detected working current is greater than the set current value, the charging station will reduce the charging current to the set current value.

Thereby ensuring the safe and reliable operation of the charging station.

Technical Data

Display Content

EKEPC3 Model 3 EV Charge Controller

Model	EKEPC3-C/S
Mode	Mode 3 charging
Operating Voltage	AC230V±10%,50Hz
Outputthe PWM Signal	Max: 32A, 1-32A adjustable
Basic Function	1:RCMU DC6mA leakage monitoring with a axuliary device of RCMU 2:Swape RFID card/NFC start or stop charging function with a axuliary device of RFID module and cards 3:LCD display function with a axiliary device of LCD screen 4:Elecronic lock function with a device Electronic lock 5:DLB function with a axuliary device of CT or kWH meter 6:Overvolatge&Undervoltage protection 7:Over current protection 8:voltage,current,Power for real time monitoring with a axuliary of kWH meter 9:Emergency Stop function with a axuliary device of Pushbutom switch
Additional Function	1:Swape RFID card/NFC start or stop charging function with a axuliary device of RFID module and cards 2:LCD display function with a axiliary device of LCD screen 3:Elecronic lock function with a device Electronic lock 4:DLB function with a axuliary device of CT or kWH meter 5:Emergency Stop function with a axuliary device of Pushbutom switch
Protocol(communication)	-OCPP1.6J Protocol,Wifi,Ethernet communication
Protocol(communication)	-Modbus-RTU protocal and RS485 communication only for kWH meter
Output Auxiliary Voltage	DC12V/100mA\DC5V/100mA
Ambient Temperature	-40℃-+50℃
Humidity	<=85%
IP Degree	IP22
Colling Method	Natural cooling
Installation Method	Din-Rail mounted