Name: DLB Current Monitoring Current Using kWH Meter for EKEPC2/EKEPCB3 Controller
Brand: ETEK
SKU: 01278
Rating: 4.1 (689 reviews)

Product Profile

The kWH meter using as the DLB current monitoring device, installation at the mian circuit of the home,

via rs485 communication with controller via wire connected, controller will read the real time of DLB current,

if the circuit current exceed the DLB current setted value,controller will reduce the charging current still stop charging

Technical Data

Model	EKEPCB2-C/S
Mode	Mode 3 charging
Operating Voltage	AC230V±10%,50Hz
Outputthe PWM Signal	Max: 32A, 1-32A adjustable
Basic Function	1:RCMU DC6mA leakage monitoring 2:Overtemperature protection 3:Overvolatge&Undervoltage protection 4:Over current protection 5:voltage,current,Power for real time monitoring
Additional Function	1:Swape RFID card/NFC start or stop charging function with a axuliary device of RFID module and cards 2:LCD display function with a axiliary device of LCD screen 3:Elecronic lock function with a device Electronic lock 4:DLB function with a axuliary device of CT or kWH meter 5:Emergency Stop function with a axuliary device of Pushbutom switch
Protocol(communication)	-OCPP1.6J Protocol,Wifi,Ethernet communication
Protocol(communication)	-Modbus-RTU protocal and RS485 communication only for kWH meter
Output Auxiliary Voltage	DC12V/100mA\DC5V/100mA
Ambient Temperature	-40℃-+50℃
Humidity	<=85%
Colling Method	Natural cooling
Installation Method	PCB mounted

Model	EKEPCB3-C/S
Mode	Mode 3 charging
Operating Voltage	AC400V±10%, 50Hz
Outputthe PWM Signal	Max: 32A, 1-32A adjustable
Basic Function	1:RCMU DC6mA leakage monitoring 2:Overtemperature protection 3:Overvolatge&Undervoltage protection 4:Over current protection 5:Voltage,current,Power for real time monitoring
Additional Function	1:Swape RFID card/NFC start or stop charging function with a axuliary device of RFID module and cards 2:LCD display function with a axiliary device of LCD screen 3:Elecronic lock function with a device Electronic lock 4:DLB function with a axuliary device of CT or kWH meter 5:Emergency Stop function with a axuliary device of Pushbutom switch
Protocol (communication)	-OCPP1.6J Protocol,Wifi,Ethernet communication
Protocol (communication)	-Modbus-RTU protocal and RS485 communication only for kWH meter
Output Auxiliary Voltage	DC12V/100mA\DC5V/100mA
Ambient Temperature	-40℃-+50℃
Humidity	<=85%
Colling Method	Natural cooling
Installation Method	PCB mounted